Banshee 60" Slope Sport/Racer...

 Specifications:
  • Wingspan - 60"
  • Wing area 410"
  • Weight - 48oz.
  • Wing Loading 17 oz/ft^2
  • Radio: 2ch
  • Wind Needed - 10mph
  • Level Intermediate/Advanced

    Kit Includes:

    • CNC Cut 1.9 EPP Wing Cores and beds
    • EPP Fuselage, Balsa elevators & t.e.
  • Balsa V tail
    • 2 - 3/8 x 1/2 x 36 Basswood Longerons
    • 1/4 x 36 Carbon Fiber Wing Rod
    • 1/8 x 1/2 x 36 Basswood Wing Spar (4x)
  • 1/8 X 1/4 Balsa Cap Strips
    • 1/2 x 30ft Fiberglass Tape    
    • 2-56 x 12 Threaded Rod,Control Horns, Clevises
  • Detailed Instructions with detail diagrams

     

    Items required to complete:

    • 5/8" fiber reinforced strapping tape
    • 2" fiber reinforced strapping tape
    • 1/2" plastic hinge tape (3M plastic tape works well)
    • 3M 77 spray adhesive
    • 20 minute epoxy
    • Goop adhesive
    • Covering material (Solartex)
    • Radio w/ 4 cell 600 ma pack
    • Micro servos (3 HS225MG )
    • Micro Receiver (Hitec Super Slim or equivalent)
    • Various tools, sandpaper, wax paper , etc.

     

    (click for larger pic)

    $94.95

    (International orders click here for Ordering Info)

    The Banshee 60" Slope racer is an exciting new plane, featuring the durability of foam and the speed of glass.

    It is fast and manueverable on the frontside of the slope....

    AND....will easily drop to the back of the slope for some high-speed DS action.

    Just like the Electron 60 DS, and the race-proven U2, the Banshee features a very stiff wing, slender fuselage, easy to build and did we say....fast!!!

    The above planes have been regularly clocked at over 100 MPH. Built correctly, you can expect the same high velocity with your Banshee.